Growers get antsy this time of year and are itching to spray. However, unless you are in a very scabby location with highly susceptible cultivars, there is no reason to begin spraying at this point. We are likely at least 10 days to 2 weeks away from needing to begin fungicide sprays in most areas. Yes, leaf scab can be important but its not as important as nut scab and if you are going to save on your fungicide bill, the time to do that will be early in the season. The earlier you begin, the more sprays you will have to make. Once June arrives there will be little margin for error and stretching out sprays during nut sizing becomes very risky on susceptible cultivars from June, onward.

Disease development requires the host and pathogen to be present and the conditions to be suitable for the pathogen to grow. If you want to assume the pathogen is present, consider that our host—the green tissue of pecan trees in the form of foliage—is not fully present yet. So, what would you really be spraying at this point? Now let’s look at the conditions required—scab grows within a range of 59-95 degrees F (optimal temp is 59-77) in the presence of free moisture (usually for at least 12 hrs). Since April 1, the temp ranges have been 53-75; 49-68; 48-75; 49-80; and 57-77 with 0 rainfall. So our temperatures are getting close but haven’t stayed within range for very long and the free moisture has been lacking. There is significant rainfall forecast over the next few days but again, there’s not much leaf growth out there yet. Following the rain, temps are forecast to fall to 44-67 degrees through the weekend and then warming by the first of next week. But even if it warms up, disease won’t develop without the moisture and it will be yet another week before there is enough growth out to worry about. So, you still have some time before you need to spray as I write this on April 5.

To be perfectly clear, the schedules offered here are not an advocation for a strict calender spray schedule. Obviously, scab development is based on the period of leaf wetness, which is not based on a calender date but is influenced to a high degree by the frequency of rainfall. These schedules are simply to be used as a framework on which to base your program. They incorporate what we know about the best use of each fungicide. Some fungicides like Phosphite and the group 3 + group 11 materials have better activity on leaf scab. Others, like Elast, Tin, and Miravis Top offer the highest degree of nut scab protection. There are also other labeled materials that could be worked into the schedule. The following is simply an example.

If it rains frequently, you need to tighten up your schedule on medium and high susceptibility cultivars. If it is realtively dry and the pressure is low, you can space the schedule out more early on in the season, especially with medium susceptibility cultivars. Once nut sizing begins (June) susceptible cultivars should never go more than 14 days between sprays, even if conditions are dry because we can get enough humidity and wetness from the dew to drive scab development even without rain. With frequent rainfall you will need to tighten up to 10 days or less between sprays. A good rule of thumb is to tighten the spray interval when you get 2 or more rain events (0.10″ or more) before the 14 day standard interval is up during nut sizing.

As we did last year, we have broken the cultivars down into 3 main categories (Low, Medium and High) as seen below. The 4th category–Medium/High — consists of cultivars that could fall into either of these 2 categories. Under most conditions they would have no scab problems under a regular spray program but in certain locations (below Highway 280, at low elevation, in crowded orchards) they will scab more and would need a high input program. Growers should use their own judgement and experience about where to place these. I am available to discuss this with any growers who are unsure about where their orchard fits.

LowMediumMedium/HighHigh
AvalonCreekCaddoByrd
ElliotKiowaCape FearCunard
ExcelOconeeHuffmanDesirable
KanzaSumnerSchleyMorrill
LakotaZinnerStuartPawnee
McMIllanEllisTannerTreadwell
Gloria GrandeTom
Whiddon

Low Input

Low input cultivars are those with a very high degree of scab resistance –think Elliot, Excel, Lakota. These require a bare minimum of sprays–3 applications at most–primarily to help manage minor diseases aside from scab like powdery mildew, anthracnose, downy spot, etc. and to assist in maintaining scab resistance

Spray 1:               Phosphite           ~ mid-late April

Spray 2:               Phosphite           ~ mid-to-late May

Spray 3:               11 + 3 mix           ~ early-mid June

Medium Input

These are cultivars that will require fungicide sprays to manage the disease but on which scab is usually easily managed without an intensive spray program in most locations. Some of these cultivars can fall into the high susceptibility category in locations with a history of scab on these particular cultivars or under situations of low elevation, poor air flow, or frequent rainfall. Use your best judgement with regard to where these cultivars fit for your own location.

Scab on these cultivars should be controlled with 7-8 sprays. If excessive rainfall is occurring throughout the nut sizing period, you can shorten your interval and extend the program out further by continuing to rotate Miravis Top and Elast/Tin in the example below.

Spray 1:                              Phosphite                          ~ mid-late April

Spray 2:                              Phosphite OR 11+3         ~ mid May

Spray 3:                              Miravis Top                       ~ early-mid June

Spray 4:                              Elast+Tin OR phosphite ~ mid-late June         

Spray 5:                              Miravis Top                       ~ early-mid July

Spray 6:                              Tin OR Elast+Tin               ~ mid-late July

Spray 7:                              Miravis Top                       ~ early-mid August

High Input

These are cultivars that we know must be sprayed intensively in order to produce the crop. They will require at least 10 fungicide sprays and likely more in many locations. If you need to extend beyond spray 10, continue rotating with Elast/Tin but consider substituting a group 3 + group 11 for Miravis Top since no more than 4 sprays with Miravis Top are advised in a given year. Miravis Prime may also be an option for rotation with Elast/Tin if available. Bear in mind that some cultivars listed in the moderate category may fall into the high category in some locations.

Spray 1:                              phosphite

Spray 2:                              phosphite

Spray 3:                              11 + 3 mix

Spray 4:                              Miravis Top + phosphite

Spray 5:                              Elast + Tin

Spray 6:                              Miravis Top

Spray 7:                              Elast + Tin

Spray 8:                              Miravis Top

Spray 9:                              Elast + Tin

Spray 10:                            Miravis Top

As mentioned previously, there are certainly more fungicides labeled for pecans than what you see listed in the examples above. Their exclusion from these examples does not mean they do not control scab. To the contrary, many are very good fungicides and could be rotated into a program just as easily as what you see above. But, based on Dr. Tim Brenneman’s data, we feel that these chemistries applied at the stage the crop will be in during the times shown above will offer maximum protection from leaf and nut scab. Group 3 and Group 11 fungicides are those containing both a Triazole and a Strobilurin fungicide chemistry (think Absolute, Stratego, Quadris Top, Amistar Top, Quilt, Brixen, Custodia, TopGuard EQ, and others)

Posted in: